Portable Hardness Tester Uee 910
Measuring Principle
This Hardness Meter is based on Leeb Rebound Hardness (HL) principle, proposed by Dr. Drietmar Leeb [Switzerland], is a dynamic hardness testing method. Hardness value is calculated as the ratio of the indenter impact velocity to the rebound velocity.
Functions & Features
● High quality and precision.
● Freely switch to hardness scales HRA, HRB, HRC, HV, HB, HS, HL.
● Direct calibration on HL, HRC, HB.
● Test at 360°angle.
● With Tensile Strength Function (U.T.S) .
● 3 years warranty and life-long services.
Measuring Materials
This Hardness Meter is able to measure Tensile Strength and Hardness of 10 types metals: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys, copper and tin alloy, copper, forged steel.
Technical Parameters
|
Model |
Uee 910 |
|
Measuring Range |
(170-960) HLD, (17.9-69.5) HRC, (19-683) HB, (80-1042) HV, (30.6-102.6) HS, (13.5-101.7) HRB, (59.1-88) HRA |
|
Hardness parameter |
HL, HRC, HRB, HRA, HS, HB, HV |
|
Accuracy |
±6HLD |
|
Memory |
600 groups |
|
PC Connection |
Available |
|
Battery |
2*AA |
|
Operating Temperature |
-20℃~+60℃ |
|
Dimensions |
163×78×33mm |
|
Weight |
240g |
|
Standard Configuration |
Main unit, Impact Device type D, Calibration block, Supporting ring, USB cable, Software, Backup accessories (Impact ball*1, Cable*1, Spanner*1) , Cleaning brush, Operation manual, Certificate. |
|
Optional Accessories |
Optional Impact Devices (D, DC, DL, D+15, G, C, E), Shaped support rings, Testing blocks |
Hot Tags: hardness meter with tensile strength function, China hardness meter with tensile strength function manufacturers, suppliers
