Portable Hardness Tester Uee 915
Measuring Principle
This Dynamic Hardness Tester is based on Rebound Hardness (HL) principle, proposed by Dr. Drietmar Leeb, is a dynamic hardness testing method. Hardness value is calculated as the ratio of the indenter impact velocity to the rebound velocity.
Functions & Features
● With the built-in thermal printer.
● Rechargeable Li-ion battery and auto power-off function.
● Freely switch to 8 different hardness scales.
● Conversion to tensile strength (U.T.S).
● PC Software for data management.
● 3 years warranty and life-long services.
Application Industries
This Dynamic Hardness Tester is with PC Software, able to realize functional hardness measurement, widely used in below fields:
● Smelting industry
● Automobile, motorcycle, railways and other vehicles industry, aerospace and so on.
● Inspection companies, research institutes, university laboratories.
● Petroleum industry, chemical industry, annual inspection of large equipment.
● Pressure vessels and so on.
Technical Parameters
|
Model |
Uee 915 |
|
Measuring Range |
(170-960) HLD, (17.9-69.5) HRC, (19-683) HB, (80-1042) HV, (30.6-102.6) HS, (59.1-88) HRA, (13.5-101.7) HRB |
|
Hardness Scale |
HL, HRC, HRB, HRA, HS, HB, HV |
|
Accuracy |
±6HLD |
|
Memory |
600 groups |
|
PC Software |
Equipped |
|
Printer |
Build-in High-speed Thermal Printer, Width for printer paper: 44.5±0.5mm |
|
Battery |
Rechargeable Li-ion battery |
|
Dimensions |
230×86×46mm |
|
Weight |
450g |
|
Standard Configuration |
Main unit, Impact Device type D, Calibration block, Power adapter, Small supporting ring, USB cable, PC Software, Backup accessories, paper of Printer, Cleaning brush, Operation manual, Certificate. |
|
Optional Accessories |
Optional Impact Devices (D, DC, DL, D+15, G, C, E), Shaped support rings, Testing blocks, Paper for Printer |
Hot Tags: dynamic hardness tester with pc software, China dynamic hardness tester with pc software manufacturers, suppliers
