Shore D Digital Hardness Tester

Shore Hardness Tester Leeb 810D

Press a steel pressure pin with a certain shape into the surface of the sample vertically under the test force. When the surface of the pressure foot completely fits the surface of the sample, the tip of the pressure pin extends to the plane of the pressure foot. Length L, the size of Shore hardness is characterized by the value of L. The larger the value of L, the lower the Shore hardness, and the higher the hardness.

● Leeb 810D is the Shore D type digital hardness tester for the plastic.

● It applies to hard plastic (such as thermoplastics, hard resin, nylon. Plexiglass, etc.), synthetic hard rubber and other related chemical products (such as anti-corrosion materials, fire-retardant materials, paint, etc.).

● Maximum locking storage, automatic calculation, under-voltage alarm.

● Stable performance, best price, good quality, good after-sales service.

1. The tip of the hardness tester is a conical tip. It is necessary to avoid strong contact between the pressure pin and the glass plate in order to protect the tip of the needle, otherwise the tip of the hardness tester may be damaged and the instrument may not be used normally.
2. The hardness tester should be strictly protected from falling and collision. When not using, please worn protective cover to protect the exposed end of the pressure pin.
3. When the hardness tester displays the under voltage symbol BATT, please replace the battery in time and pay attention to the polarity of the battery.
4. When not using the Shore hardness tester, please cover the mounting hole of the hardness tester to prevent dust from entering the instrument.

Hot Tags: shore d digital hardness tester, China shore d digital hardness tester manufacturers, suppliers