Introduction to the characteristics of Brinell hardness tester

Permanent indentation: Using 3000kg test force and 10mm ball, the indentation can accurately reflect the true hardness of coarse grain materials such as cast iron, cast steel, and forgings. The permanent indentation left after testing can be repeated at any time.
True and accurate: Tested according to the real Brinell hardness test principle, which is the same as the desktop Brinell hardness tester. It is not a conversion value with large distortion obtained by other portable instruments (such as Leeb hardness tester).
Accurate testing: The test force calibration accuracy is 0.5% of the load, and the hardness testing accuracy is the same as that of the desktop computer.
Any direction: There is no direction limit and can be used for measurement in any direction: including above, below, side, upside down, etc.